ITALWAX FLEX Depilatory wax cartridge, OUD 100ml

Product description:

Italwax Flex is suitable for removing hair from large body surfaces (arms, legs, back). A perfect blend of synthetic and natural resins with an innovative ingredient input. Flex wax has a very high plasticity, it is applied to large surfaces in a thin layer with a metal spatula (or roller). After solidification, the wax forms a thin film on the skin that grabs all the hairs (especially when working with a spatula) and guarantees firm adhesion to the depilation strip. The melting point of FLEX wax is +37, +39 ° C. Product forms: cartridge 100 ml, cans 400 ml and 800 ml. Wax contains essential oil.

ITALWAX FLEX Aquamarine:

Medium density wax with titanium dioxide and light blue color, perfectly visible on the skin. Intended for medium coarse hair removal, contains titanium dioxide for better adhesion of the wax to the hair, is not transparent, clearly visible on the skin.

Main features:

• 100% removes hair without tearing it
• Does not leave a sticky feeling on the skin
• Significantly reduces pain during depilation
• Suitable for all hair types, from fine to coarse

Use with the cartridge method:

• Heat the wax in the melting machine to a temperature of 40 °C.
• Treat the skin of the depilation area with a pre-waxing lotion.
• When holding the cartridge inside the wax melter, make sure the wax is warm enough.
• Apply the wax to the treated skin area in the direction of hair growth.
• Apply the waxing cloth, keeping the tip unattached to the wax.
• Carefully press the strip to the skin.
• Holding the free end of the strip, pull off the strip with a quick movement in the direction opposite to the direction of hair growth. Repeat the procedure on the next skin area. Wax may be applied no more than 2 times in one and the same place.
• After completing the procedure, remove wax residue using post-depilation lotion.

Application by spatula method:

• Heat the wax in an electric heater to t + 42 ° С.
• Before depilation, the skin is treated at the depilation site with lotion or foam.
• Apply some talcum powder on the surface of the skin.
• Mix the wax from time to time, keep an eye on the consistency, the ready-to-use wax should not be liquid.
• Take the required amount of wax with a spatula.
• Remove excess wax from the blade. Attention, the wax may flow from the spatula!
• To avoid wax stains, keep the wax warmer next to the couch. In order not to stain the surfaces, when moving the wax closer to the depilation area, hold the depilation strip under the spatula.
• Apply wax to the treated skin in the direction of hair growth.
• Using the edge of the spatula, quickly spread the wax over the waxing area, covering a large area with a thin layer.
• Apply the waxing cloth, keeping the tip unattached to the wax.
• Carefully press the strip to the skin.
• Holding the free end of the strip, pull off the strip with a quick movement in the direction opposite to the direction of hair growth. Repeat the procedure on the next skin area. Wax may be applied no more than 2 times in one and the same place.
• After completing the procedure, remove wax residue using post-depilation lotion.

Warning: Test the sensitivity of the skin when applying the wax to the hand!